TL-2000 Coating
TL-2000 is a top layer road and pavement sealing material. This single component liquid is applied as a thin layer on asphalt roads and pavements to restore the asphalt’s elastic properties and prevent oxidation.
Malaga Airport May 2023
TL 2000 is a patented formulation for repairing asphalt surfaces; It is being used at Malaga Airport Spain and LAX Los Angeles USA. TL coating is designed to prevent the breakdown of asphalt surfaces and microscopic cracks. A road or airport apron coated with TL-2000 is protected from water penetration, erosion and deterioration. This increases safety and prolongs service life.
TL-2000 Asphalt Rejuvenator
Much of the Problem is due to deterioration of roads and pavements caused by moisture, UV rays and oxidations. TL-2000 is a unique, patented, single-component black liquid micro-bitumen polymer compound which can extend the service life of roads by 8-10 years.
- Prevents water from penetrating the bulk
- Protects from UV rays, acids and oxidation
- Rejuvenates road binder using patented technology
- Seals small cracks
- Can improve friction
- Extends service life
TL-2000 should be applied on an even surface. If the road surface is broken, pothole repair must be done prior to applying any top layer sealant such as TL-2000.
TL-2000’s consumption rate is approximately 1kg per 1sqm. This translates to 1mm black polymeric membrane protecting the road surface.
HALIK TL 2000 is a patented formulation; TL coating is designed to prevent the breakdown of asphalt surfaces and microscopic cracks. A road coated with TL-2000 is protected from water penetration, erosion and deterioration. This increases safety and prolongs service life.
Laboratory tests show that TL-2000 penetrates 4cm into asphalt pavements, rejuvenating their oxidized binder. Roads sealed with TL-2000 show:
- Extended road service life
- Better road quality
- Better drive quality
- impermeability to water penetration, cracking and oxidation
- Increased pavement safety through higher friction and better pavement visibility
Although traditionally black, TL2000 can be made into other colors. Moreover, TL-2000’s array of applications includes concrete & soil roads coating, metal surfaces coating, wood and more. TL-2000 is unlike any other product on the market. A patented technology, TL-2000 contains absolutely no water - making it a very durable waterproof coating.
TL-2000 has been used and tested worldwide and is recognized as an industry leader.
Frequently Asked Questions
What is TL-2000
TL-2000 is a polymer modified road coating material. It contains 70% waste mineral powder and is cold applied on any surface. After a short curing period, a 1mm thin membrane is created. This layer protects the surface and further rejuvenates it. The technology is patented under US patent laws.
Why use TL-2000
Due to the negative effects of UV rays and water, roads usually lose all their positive properties in 2-3 years after the road is built. Seal coating the asphalt with TL-2000 extends the service life of roads for 8-10 years or more, increases skid resistance, gives water and UV protection, and decrease road maintenance costs.
How is TL-2000 different
TL-2000 has inherit characteristics that make it superior to traditional emulsified seal coating prodocuts: - TL-2000 can be made entirely of environmentally friendly materials - TL-2000 can be made in colors: black, grey, red, green, etc. - Due to high content of waste powder, TL-2000 is considerably cheaper than competing products - Apart from asphalt road rejuvenation, TL-2000 gives full water, UV rays and full chemical resistance protection (Alkaline substances, Salt solutions, Sulphuric Acid (40%), Nitric Acid (25%), Acetic Acid (70%), Hydrochloric Acid (30%), Phosphoric Acid (80%), etc). - TL-2000 contains no water and forms a rigid bond with the road once fully cured. - Highly versitile: TL-2000 can be modified and used for ports, stabilized soil roads, iron coating, concrete, anti icing, tack coating and more!
What is the material application rate per sq. meter?
TL-2000's application rate is dependent on the road condition, and may vary from 700 grams to 1.2 kg per sqm. For stabilized soil road coating application expect to use between 1.5 to 2.0 kg per sqm.
When can the road be re-opened for traffic?
TL-2000 takes approximately, depending on the ambient temperature, 45 minutes to one hour to dry. The road can then be re-opened for traffic immediately.
How is TL-2000 applied?
TL-2000 c an be applied manually or automatically. Cold applied, No special sur face preparation. Rapid curing ( road can be opened for traffic after ~ 40 min)